Hydraulic Vibratory Hammers

For Excavators

An excavator machine can be used for driving smaller piles through the use of the hydraulic vibratory hammer.

Vibratory hammer is mounted on the excavator arm through a fly jib. It's powered by the excavator's systems and opereted from operator's cabin.

Vibratory hammer is useful for improving your excavator's working capabilities and save your funds by not spending them on another didecated machine for pile driving.

Characteristic	T-55	T-75	V-150	V-250	V-300	V-400	V-500
Eccentric Moment, kg*m	5.5	7.5	2.5	4.26	5.3	6	7
Frequency, rev/min	3 000	3 000	2 800	2 800	2 800	2 800	2 800
Centrifugal Force, kN	545	742	172	298	370	525	610
Working Pressure, bar	320	320	300	300	300	315	315
Vibratory Pile Hammer Weight, kg	2 550	2 755	1 100	1 700	1 745	2 020	2 100
Clamp Weight, kg	-	-	280	588	588	680	680
Length, mm	1 109	1 122	1 850	1 530	1 530	1 700	1 700
Width, mm	1 124	1 129	1 050	1 360	1 360	1 600	1 600
Height, mm	2 470	2 510	1 100	1 360	1 360	1 600	1 600
Grip Type	Side	Side	Top	Top	Top	Top	Top
Applicable Excavator Weight, t	20~30	40~50	12~17	20~25	25~30	35~40	45~50

For Cranes

Characteristic	YZ-90D	YZ-100	YZ-150	YZ-180	YZ-230	YZ-300	YZ-400
Eccentric Moment, kg*m	27	32	46.1	51	105	137	226
Frequency, rev/min	1 700	1 700	1 700	1 800	1 410	1 410	1 300
Centrifugal Force, kN	860	1 020	1 465	1 810	2 300	3 000	4 185
Max line pull, kN	400	600	700	600	1 200	2 000	2 500
Amplitude, mm	32	27.2	33	32	33.3	37	40
Fluid Flow, l/min	312	400	450	680	705	1 015	1 300
Weight, kg	2 800	4 700	5 800	5 900	11 500	16 000	18 500
Length, mm	1 750	2 650	2 790	2 845	2 450	2 650	2 650
Width, mm	570	650	640	530	1 100	1 150	1 400
Height, mm	1 730	4 700	1 830	1 880	3 550	4 300	4 300
Applicable Station	400Р	500Р	500Р	600Р	800Р	1200Р	1400Р

For Cranes - Heavy

Характеристика	YZ-230х2 Tandem	YZ-300х2 Tandem	YZ-400х2 Tandem	YZ-800В
Eccentric Moment, kg*m	210 х 2	137 х 2	226 х 2	550
Frequency, rev/min	1 410	1 600	1 300	1 350
Centrifugal Force, t	2 300 х 2	3 000 х 2	4 185 х 2	11 000
Extraction Force, t	2 990 х 2	3 700 х 2	4 853 х 2	12 100
Amplitude, mm	33.3	37	40	35
Fluid Flow, l/min	705 х 2	1015 х 2	1300 х 2	3 000
Weight, kg	23 600 х 2	33 600 х 2	37 600 х 2	63 000
Applicable Station	800Р х 2	1 200Р х 2	1 400Р х 2	3 000Р

Hydraulic Stations

Characteristic	400Р	600Р	800Р	1200Р	1400Р	3000Р
Power, kW/hp	400	600	800	1 200	1 400	3 000
Working Pressure, bar	350	350	350	350	350	350
Oil Consumption, l/h	380	760	1 040	1 500	1 600	2 600
Weight, kg	6 000	8 000	8 500	15 200	16 900	30 000
Length, mm	4 080	4 370	4 550	4 370	4 380	7 306
Width, mm	1 710	1 830	1 800	2 925	2 920	2 362
Height, mm	2 860	2 400	2 550	2 050	2 060	2 745

Yongan Machinery Co., Ltd. is manufacturing pile hammers since 1985 and constantly imporing their products.

Vibratory hammer for cranes YZ-400 is the largest among its equivalents in China. In year 2018 new production if vibratory clamps was launched. The clamps are able to hold sheet piles both from the top and from the side without limiting the height to which the excavator arm can be raised. It allows the excavator to drive sheet piles to a higher depth, up to 18 meters in some cases.

Universal hydraulic stations are capable of working with vibratory and hydraulic hammers.